The press dehydrator equipment is Kitchen waste treatment equipment One, the function of this equipment relates to a dehydrator used to remove water from food materials. Now let's Food waste treatment equipment The manufacturer came to talk with you about how to debug and maintain the press dehydrator?

The press dehydrator can be used for various liquid-solid separation. It adopts an independent drive rotor and adjustable cone segments, which can provide instantaneous pressure regulation and proper extrusion. It is generally used for continuous dehydration and juice pressing of organic food and food. In addition, the press can also be used to convert waste into energy, such as waste derived fuel treatment; Waste is converted into green use, such as biodegradable organic waste compost; The processed liquid food waste is used for biodiesel, etc. The weight and volume of waste after treatment are reduced, saving the transportation cost.

The press dehydrator is used to extrude materials containing impurities, such as Food waste treatment And medical waste disposal. Iron filings and iron filings shall not enter the machine body to prevent internal damage of the machine and affect the normal operation of the machine body.

The dehydration rate of materials is related to weather, material storage time, material type, material status and other factors. For example, after fresh fruits and vegetables are stored for a period of time, the output of juice will change; Fruit juice output in the north and south will change; In rainy season and dry season, the dehydration rate of materials will be different due to different climates; The dehydration rate of crushed materials is higher than that of direct pressing.

Daily maintenance of press dehydrator:

1. When the machine needs to be shut down at the end of stamping work, do not stop the operation of the equipment immediately. First, reduce the working pressure of the hydraulic transmission system, so that the material sediment after pressing and dewatering can open the discharge port at the end of the screen drum; Let the equipment run again for a period of time until the material sediment in the sieve drum cannot be discharged, and then shut down the machine to remove the remaining material sediment in the sieve drum.

2. In the process of operation, the working pressure of the equipment should be reduced as much as possible, otherwise the equipment will stop suddenly or the screen drum will break.

3. The water temperature of the hydraulic transmission system shall not exceed 60 ℃, because when the hydraulic oil pump is under high pressure, the temperature will rise rapidly. It is recommended that the temperature of the gasoline pump under high pressure should not exceed three minutes, and the temperature rise of each rolling bearing of the transmission device should not exceed 40 ℃ of the indoor temperature.

4. During equipment operation, do not let sharp, hard objects and internal metal objects enter the body. They can damage components and endanger the normal operation of the equipment. They can be cleaned before pressing.

5. If the equipment is not used for a long time, all substances in the sediment must be removed, and the parts easy to rust must be coated with vegetable oil for maintenance, and then placed in a naturally ventilated and dry place.

6. The hydraulic oil of the hydraulic transmission system shall be kept clean.

7. The rolling bearing of transmission device shall be filled with lubricating grease on time; The gearbox shall be filled with lubricating grease on time; The hydraulic oil filter element shall be timely introduced into the gear oil for maintenance.

Now kitchen waste disposal equipment is still very common, and the above is the analysis of this problem. If you have other questions, please call and leave a message to us!